Lún: HYPER 3 D67 (60mm & 68mm) Disc Brake Carbon Wheelset

In Stock - Immediate dispatch in NZ Special Order

Regular price NZD$2,650.00 NZD$2,650.00 Incl GST

NEW PRODUCT LAUNCH - PRE ORDER for AUGUST DELIVERY 

The Lún HYPER 3 D67 wheelset is designed to maximize both acceleration and cruising capabilities. Its high-profile rims and wide-body spokes boost its acceleration performance while delivering a striking visual impact.

SPECIFICATIONS:
  • 60mm Front / 68mm Rear F-RAPID Rim Profiles
  • 23mm Internal Width / 28.4mm External
  • Aero-optimised for 28-32mm tyres
    (Recommended tyre width: 30mm)
  • Matte finish with Laser etched logos
  • Wide Carbon Spokes
  • Ceramic Bearings
  • Titanium Ratchet System
  • 1500g (±25g per wheel)
  • Disc Brake
  • All wheelsets are shipped with Shimano HG freehub body by default,
    please check our parts & accessories section for XDR and Campagnolo options
  • Competitive shipping rates Nationwide.
    All stock is held locally in Auckland warehouse.

ALL OUR WHEELSETS ARE DEVELOPED WITH TUBELESS SETUP FOR BENCHMARK TESTING. WE STRONGLY RECOMMEND A TUBELESS SETUP ON OUR WHEELSETS FOR OPTIMISED PERFORMANCE AND COMFORT

We stand by all our products and offer a 2 year limited warranty on our wheelset products. This wheelset carries a limited warranty of two (2) years from the date of purchase to the original owner only. Unless otherwise stated, the sole remedy under this warranty or any implied warranty is limited to the replacement of defective parts with those of equivalent or comparable value at the sole discretion of Winspace NZ which arise from a manufacturing defect. Winspace NZ will not be responsible for any direct, incidental or consequential damages, including, without limitation, damages for personal injury, property damage, or other losses, whether based on contract, warranty, negligence, product liability or any other theory. This warranty does not cover normal wear and tear on parts in situations where there are no material defects. This warranty does not cover consumable components including brake pads, spokes, rim tapes, bearings, etc. - Any damage or faults arising from or during the use of competition, racing, time trialing or any event involving an accident or crash is the sole responsibility of the user and will not be covered by any warranty.

Details

HYPER 3

What’s the buzz this time?

Spoke Lacing Optimization

we’ve improved from the 2/3 cross-laced pattern to a vertically aligned design for better load distribution.

Wind Tunnel Tested

Boasts need scientific validation to be credible. This time, we partnered with Japan  FUDO Industry Inc. and conducted comprehensive wind tunnel tests on our HYPER 3. The results show that compared to the HYPER 23, the HYPER 3 saves 2.2 watts at a speed of 48km/h.

Wider, with Less Compromise

With updated manufacturing processes, the new hook edge is 47% shorter than the previous generation. Widening the inner rim width to 23mm, the new design can better accommodate 30mm or wider tyres to form a better seal for optimising tubeless performance.

Overall Performance Improved

Many people care about weight reduction. While maintaining stiffness, we have reduced the weight of the 33/45 series by 35g and the 67 series by 16g—these are conservative estimates. At the same time, we’ve also improved stiffness across the board.

Wider & More Aero

Using our latest generation of wider carbon spokes, the Hyper 3 combs through the airflow more effectively to reduce wind resistance.

Lighter & Stronger Titanium Ratchet

Titanium is commonly used in aerospace and is touted for its high strength, lightweight and abraision resistance being well suited for the hub’s “lifetime” use.

What have we kept from BEFORE?

Same Rim Profiles

Just like the HYPER 23 series, we offer 33, 45, and 67 rim profile versions, covering most riding scenarios.

F-RAPID Design

The Front and Rear Aero Profiles are Individually Designed to meet their unique demands. The front wheel is optimized for its leading edge performance giving speed and stability in a variety of conditions with a more rounded rim profile. The rear wheel profile is taller and is optimized for lower yaw angles with an emphasis on trailing edge performance.

Tested by Pros, Approved by the UCI

Pro cyclists are the ultimate test for bike equipment. They only want the best performance, and they demand reliability. All our new products are tested extensively in both lab conditions and out in the real world.

Lún: HYPER 3 D67 (60mm & 68mm) Disc Brake Carbon Wheelset

Lún: HYPER 3 D67 (60mm & 68mm) Disc Brake Carbon Wheelset

What are you looking for?

Your cart